Filter
Top Products
To
feed paper one sheet at a time, follow these steps:
1.
Select the paper size using your application software. If this
is not possible, use SelecType to choose the size of the paper.
2.
Make sure the printer is on line.
3.
Open the paper cover and remove the stack of paper from
the paper bin.
4.
Adjust the paper guides to match the size of paper you are
using. Insert a sheet of paper into the bin until it meets
resistance and then close the paper cover.
Note:
For printing on envelopes, labels, transparencies, and heavy
paper, set the paper path selector on the top left corner
of the
printer to the face-up position. If you feed single sheets regularly,
you may want to install the optional face-up output tray. See
Chapter 5, “Options.”
5.
If you leave the paper feed selector in the face-down
position, install the paper stopper to match your paper size
by inserting its hooked prong into the appropriate slot on
the top of the paper cover and sliding it to the right.
2-4 Paper Handling