Filter
Top Products
Font selected with software commands won’t print
Be sure you have installed the correct font cartridge and make
sure that the orientation (portrait or landscape) matches the
selected font.
Some or all of the output is garbled or printed as asterisks
Make sure that both ends of the interface cable are plugged in
securely.
If you are using a serial interface, make sure that both the
computer and printer are set to use the same number of data
bits per word and that they both use the same parity, baud rate,
and number of stop bits.
If the printer still does not print correctly, contact your dealer.
Position of the printout not correct
Make sure that you are using the correct page length and
margin settings in your application program. Do not use
SelecType to make these settings because software settings
override SelecType.
Graphics don’t print correctly
Make sure that your software program is set for the printer
emulation you are using. For example, if you are using the
LJ-2P emulation, be sure that your graphics software is set for a
LaserJet II printer.
3-6 Troubleshooting