Filter
Top Products
Changing the RITech setting
You can select LIGHT, MEDIUM (the factory setting), HEAVY,
or OFF.
RITech is in effect when you select LIGHT, MEDIUM, or
HEAVY. Changing the setting to OFF turns off the RITech
feature.
If your check pattern is too heavy, change the setting to LIGHT;
if it is too light, change the setting to HEAVY; if you are printing
gray shading or screen patterns, change the setting to OFF.
To change your RITech setting, follow these steps:
1.
Enter SelecType Level 2 by pressing the
LEVEL 2
button.
2.
Press
V
until RITech appears on the display.
3.
Press
)
once and then press
V
until your desired setting
(LIGHT, MEDIUM, HEAVY, or OFF) appears on the
display.
4.
Press
)
twice to set the new setting and print a new check
pattern using the new RITech setting.
5.
Look at the new check pattern to see if it is improved. If you
wish to save the new setting, press the
EXIT
button to exit
SelecType.
If the pattern still needs to be improved, you probably need to
change the print density setting. For a darker (HEAVY) RITech
setting, make the print density lighter and vice versa. See
“Adjusting print density” earlier in this chapter for instructions.
Note:
Do not change the pint density unless it is necessary. Doing so
affects all text and graphics, so check the new setting by printing
several pages.
Controlling Your Printer
1-21