Filter
Top Products
REINSERT CARD [E]
You may have removed a card or cartridge while the
FEED
light
was still lit or while the printer was on line. Make sure the
printer is off line, reinsert the card or cartridge into the correct
slot, and press
CONTINUE.
REMOVE CARD [E]
You may have inserted a card or cartridge while the printer
was on line or while the
FEED
light was on. To correct this
error, take the printer off line, then remove the card or cartridge
and press
CONTINUE.
Before you re-insert the card or
cartridge, make sure that all data in the buffer has been printed
and that the printer is
off line.
If the
FEED
light is on, press
FEED
to print out the remaining data.
RESELECT TRAY [E]
The optional lower paper cassette is not installed and the
SelecType INPUT option is set to OPT or AUTO. Install the
optional lower paper cassette; then press
CONTINUE
or simply
press
CONTINUE
and paper is automatically selected from the
standard paper bin. Then change the INPUT option to STD.
RESET [S]
The printer has been reset to its previous setting using the
macro number specified with LOAD MACRO in SelecType.
3-24 Troubleshooting