Filter
Top Products
Default Settings
When the printer is initialized, the settings for the LQ and FX
emulations are reset to the values shown in the table below.
Item
I
Factory
setting
I
Reset value
Paper input
Standard paper
bin
SelecType setting
Paper size
I
A4 SelecType setting
Page length 66 lines
Depends on the paper size
and orientation settings
Top of form
I
0.5 inch
I
SelecType setting
Left margin
Left edge of the
printable area
SelecType setting or left
edge of the printable area
Right margin
80 columns
( 10 cpi)
Depends on the default right
margin set with SelecType
Horizontal tab
settings
Every eight
Every eight characters. (The
characters. (The
character width depends on
character width is the SelecType condensed
10 cpi.)
print menu setting.)
Vertical tab
settings
Every 1/6 inch Every 1/6 inch
I
VFU channel
I
Channel 0
I
Channel 0
Character
spacing
10 cpi
Depends on the condensed
print menu setting
International
character set
USA SelecType setting
Typeface
I
Courier SelecType setting
Proportional
spacing
Fixed
SelecType setting
Character table
(ESC t)
On (ESC t1) SelecType setting
Condensed
Off SelecType setting
LQ and FX Emulation Modes
C-13