Filter
Top Products
AUTO CONT.
This Level 2 option permits the printer to automatically
continue printing after a certain period of time when one of the
following errors occurs: SET FULL PRINT, PAGE BUFFER
FULL, PAPER SIZE ERROR, TRAY SET XXX, INSUFF
MEMORY, and SPL IGNORED. When this option is OFF, you
must press the
CONTINUE
button to resume printing. In most
cases, leave this option set to OFF.
Menu/submenu Available options
4
AUTO CONT.
OFF
b
ON or OFF
CH TIMEOUT
This Level 2 option sets the time for a channel timeout. If the
printer is on line and receives no new data for the number of
seconds specified, and if there is data in another channel, the
printer automatically switches to the channel with data. The
factory setting is 60.
Menu/submenu
Available options
:
CH TIMEOUT 60
b
10 to 600 (in increments of 10)
COPIES
This Level 1 option selects the number of copies to be printed
up to 999. The factory setting is 1. If you select a number greater
than one, the display keeps count of the number of copies
completed and the current setting. For example, if you set the
COPIES option to 10 and five copies have been printed, the
display shows 5/l0.
Menu/submenu
Available options
0
COPIES
1
b
1 to 999
4-8 SelecType