Filter
Top Products
Stylus C40UX/C40SX/C20UX/C20SX Revision A
Disassembly and Assembly Disassembly 72
8. Disconnect the FFC from the connector.
Figure 4-30. Disconnecting the FFC
If the Carriage unit is disassembled or replaced with a new one,
make sure that the Carriage timing belt is set in the assembling
groove correctly as following figure.
FFC
Timing belt
A D J U S T M E N T
R E Q U I R E D
When the Printhead is replaced with a new one, following
adjustments must be performed in the order below: Refer to Table
5-1
1. Initial ink charge
2. Head ID input
3. Bi-D adjustment
When the Printhead is removed and reinstalled, only the following
adjustment is required. Refer to Table 5-1
1. Head cleaning
2. Bi-D adjustment