Filter
Top Products
Stylus C40UX/C40SX/C20UX/C20SX Revision A
Adjustment Overview 86
5.1.9 Head cleaning
This printhead cleaning is CL1’ and about 1/8 of the brand-new black I/C and 1/17 of
the brand-new color I/C are consumed. Before use this function, check the remaining
ink amount of the both I/C by using the “Get status” function.
1. Choose the “Head cleaning” in the Maintenance menu.
Figure 5-19. Choose the Head cleaning menu
2. Click the “OK” button in the menu. The powerful cleaning is performed.
5.1.10 Initial ink charge
After you replaced any of the following units, perform initial ink charge and return the
printer after making sure that ink is ejected correctly from the printhead.
After replacing the printer mechanism
After replacing or removing the printhead
1. Choose the “Initial ink charge” in the Maintenance menu.
Figure 5-20. Choose the Initial Ink Charge menu
2. Click the “OK” button in the menu. The initial ink charge is performed.
NOTE: As described in the menu message, about 1/4 amount of the Black ink
cartridge and 1/9 amount of the Color ink cartridge are consumed in the
initial ink charge operation.
C A U T I O N
Before you perform the initial ink charge operation, replace the
installed cartridges with new ones, because the ink amount used
for the initial ink charge operation is so large.