Filter
Top Products
Stylus C40UX/C40SX/C20UX/C20SX Revision A
Adjustment Overview 77
5.1.2 Adjustment Program Initial Setting menu
You have to input the following four items before entering the adjustment main menu.
Model name (Stylus C40UX/40SX/20UX/20SX)
For the Stylus C40UX, select Model name “Stylus C40UX.”
Interface setting (LPT1, LPT2, LPT3, EPUSB1, EPUSB2, EPUSB3)
1. When you run this program, the following menu appears. Select the model name
in the screen below.
Figure 5-1. Model Name Selection
NOTE: This printer stores model name in the PROM. Therefore, even you select
the model name in the screen above, model name will not stored in the
EEPROM. Selecting model name in the screen above determines
respective special command for each model.
2. Select the Interface port number which you connect the printer to your PC.
Figure 5-2. Interface Setting