Filter
Top Products
Stylus C40UX/C40SX/C20UX/C20SX Revision A
Adjustment Overview 85
5.1.8 Top margin
This function can be used to change the top margin value.
You are required to perform this adjustment after performing the following operations.
Replacing the Print mechanism
Replacing the main board
1. Choose the “Top margin” in the Adjustment menu.
Figure 5-16. Choose the Top margin menu
2. Choose the “Print the Top margin” in the “Top margin adjustment” and click the
“OK” button.
Figure 5-17. Top margin adjustment pattern
3. Check the printed pattern. The printed pattern will show a line indicating the
current top margin and will show the setting value.
4. When adjusting the top margin, select “Adjust” from “Top margin adjustment,”
then click the “OK” button.
5. Input an adjustment value that is within the range –127 ~ 127, then click the “OK”
button. The adjustment value is stored in the EEPROM.
Figure 5-18. Top margin adjustment input menu
6. When checking the adjusted top margin, return to the previous screen by pressing
the “Previous” button, then select “Print the Top Margin” and click the “OK”
button.
C H E C K
P O IN T
Make sure that Top margin is 3mm by measuring with scale.