Filter
Top Products
6. Follow the instructions on the screen to choose the print head
you want to calibrate. Then select
Next
.
7. Make sure the printer is on and paper is loaded. Then select
Next
to print the Current Alignment Sheet.
8. Select the misaligned pattern. (If more than one pattern is
misaligned, select a misaligned pattern now. After you
finish the steps in this section, repeat steps 4 through 11 to
select and calibrate each remaining misaligned pattern.)
9. Select
Next
twice to print the pattern’s Test Alignment Sheet.
This printout contains numbered line groups with varying
alignment.
10. Select the number of the line group with the best appearance
and then select
Next
to calibrate the printer.
11. To check the calibration results and exit the Calibration
utility, select
Print
.
Calibrating the Printer Using a Macintosh
If you have a Macintosh, follow the steps below to calibrate
your printer.
Note:
If the Status Monitor utility is running, click
Quit
to close it before
you start the calibration utility.
1. Double-click the
Bi-D Calibration
icon on your hard disk to
start the utility.
2. When you see the screen to select a printer type, choose your
printer name from the list and click
OK
.
3. Select the port to which your printer is connected.
L
Elbe+
A5 size Chapter 6
3-25-96 MT, pass 5
6-12
Maintenance