Filter
Top Products
5. Remove any paper from the sheet feeder and remove the
paper support.
6. Install the transportation screw to secure the print head to
the carriage as shown below.
7. Push in the output tray extension and close the tray.
8. Attach any other protective materials to the printer. See the
Notice Sheet that was packed with the printer.
9. Repack the printer and attachments in the original box.
Be sure to keep the printer flat as you transport it. If you notice
problems with your printed output after transporting the
printer, clean the print heads as described on page 6-2. If the
image is misaligned, calibrate the printer as described in this
chapter.
trnsclp2
R
Elbe+
A5 size Chapter 6
3-25-96 MT, pass 5
Maintenance
6-15