Filter
Top Products
2. Plug the 36-pin end of the cable securely into the printer’s
interface connector. Then squeeze the wire clips together
until they lock in place on both sides.
If your cable has a ground wire, attach it to the ground
connector below the interface connector.
3. Plug the 25-pin end of the cable into the computer’s parallel
interface. (If necessary, see your computer manual for more
information.)
4. Turn on the printer by pressing the
POWER
switch and then
turn on your computer.
Now see Chapter 2 for instructions on installing and using the
printer software.
ew-16
R
Elbe+
A5 size Chapter 1
3-26-96 MT, pass 6
Setting Up the Printer
1-17