Filter
Top Products
Be sure to install both ink cartridges. The printer will not
work if only one cartridge is installed.
8. Push down the ink cartridge clamps until they lock in place.
c
Caution:
Once you install the ink cartridges, do not open the clamps
or remove the cartridges except to replace them with new
ones. Once you remove a cartridge, do not reuse it.
Reusing a cartridge that has been removed may damage
the print head.
9. Press the
Load/Eject
button again to return the print head
to its home position. (Even if you do not press
Load/Eject
,
the print head moves back to its home position about
30 seconds after you close the clamps.)
After you install the ink cartridges, the printer charges the
ink delivery system. This takes about two minutes, and the
Power
light flashes until the operation is done.
c
Caution:
Never turn off the printer when the
Power
light is
flashing.
ew-10new
L
Elbe+
A5 size Chapter 1
3-26-96 MT, pass 6
1-10
Setting Up the Printer