Filter
Top Products
Using the Default Setting Mode
Additional printer functions are available through the Default
setting mode. Because the printer’s factory defaults are
designed to meet the needs of almost all users, you rarely need
to change the printer functions listed below. If necessary,
however, you can turn on the Default setting mode and change
the settings using the control panel buttons.
The table below lists the settings and available options, with
default settings in bold type. Detailed descriptions follow the
table.
Setting Options
Print direction
Auto
, Bi-D, Uni-D
Font
Courie
r, Roman, Sans Serif, Prestige,
Script, Roman T, Sans Serif H
Pitch
10 cpi
, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
Interface mode
Auto
, Parallel, Serial
Auto interface wait time
10 seconds
, 30 seconds
Software
ESC/P 2
, IBM X24E
Auto CR (IBM mode only)
Off
, On
AGM (IBM mode only)
Off
, On
Character table
PC437
, PC850, PC860, PC861, PC863,
PC865, Abicomp, BRASCII, Italic U.S.A.,
Italic France, Italic Germany, Italic U.K.,
Italic Denmark, Italic Sweden, Italic Italy,
Italic Spain I
Auto line feed
Off
, On
Network interface mode
Off
, On
Loading position
3 mm
, 8.5 mm
Thick paper
Envelope
, Index card (portrait)
Economy
Off
, On
L
Elbe+
A5 size Chapter 5
3-25-96 MT, pass 5
5-12
Controlling the Printer