Filter
Top Products
Word format:
Data bit
Parity bit
Start bit
Stop bit
8 bits
None
1 bit
1 bit
Connector: 8-pin mini-circular connector
Recommended cable: Apple System Peripheral-8 cable (M0197)
Initialization
The printer can be initialized (returned to a fixed set of conditions) in
these ways:
Hardware initialization
∗
The printer is turned on.
∗
The printer receives an INIT signal from
the parallel interface: pin 31 goes LOW
Software initialization
∗
Software sends the ESC @ (initialize the
printer) command; the last panel
settings are kept
Each initialization method resets the font according to the default settings
selected using the control panel. However, ESC @ does not initialize the
printer mechanism, clear the input data buffer, or clear the user-defined
character set.
R
Elbe+
A5 size Appendix A
3-25-96 MT, pass 4
Technical Specifications
A-15