Filter
Top Products
2. Lower the output tray and lift up the printer cover.
3. Hold down the
Load/Eject
button on the control panel for
about five seconds until the print head moves slightly left,
to the ink cartridge install position. The
Power
light begins
flashing.
c
Caution:
Never move the print head by hand; always use the
Load/Eject
button to move it.
4. Pull up each of the ink cartridge clamps to open them. (If you
don’t do this within 30 seconds after pressing
Load/Eject
,
the printer automatically moves the print head back to its
home position, far right. If this happens, press
Load/Eject
again.)
ew-6ne2
protective
sheet
ew-7new
L
Elbe+
A5 size Chapter 1
3-26-96 MT, pass 6
1-8
Setting Up the Printer