Filter
Top Products
❑
After printing on high-quality glossy paper or
transparencies, remove each sheet from the output tray
immediately. Make sure each sheet is dry before stacking.
❑
You can print on sheets of labels in your printer; just follow
the instructions for loading plain paper in Chapter 1.
❑
Return unused sheets and envelopes to their original package
as soon as possible after you finish printing. Unfavorable
storage conditions—especially high temperature, humidity,
and direct sunlight—can damage the media.
❑
Follow any other special loading procedures identified in
the following sections.
Loading Special Papers and Transparencies
The following procedure explains how to load coated papers,
glossy paper, and transparencies. You can load up to the
following number of sheets in the sheet feeder:
❑
70 sheets of special coated paper
Note:
If you load legal-size special coated paper for 720 dpi, do not load
it more than halfway to the arrow on the left edge guide of the
sheet feeder.
❑
50 sheets of transparency film with one sheet of plain paper
beneath the last transparency in the stack
❑
30 sheets of high-quality glossy paper with a sheet of plain
paper beneath the last sheet in the stack; to avoid printing
on the plain paper, print your document one page at a time.
If you load a single sheet of glossy paper, place a sheet of
plain paper beneath it and print one page at a time.
L
Elbe+
A5 size Chapter 4
3-26-96 MT, pass 5
4-6
Paper Handling