Filter
Top Products
14
14 | Introduction
•
This product’s power cord is designed for use with this product only.
Using it with other equipment may result in fire or electric shock.
• Do not use a damaged or frayed power cord.
• If you use an extension cord with this product, make sure the total
ampere rating of devices plugged into the extension cord does not exceed
the cord’s ampere rating. Also, make sure the total ampere rating of all
devices plugged into the wall outlet does not exceed the wall outlet’s
ampere rating.
• Do not block or cover the openings in this product’s cabinet.
• Do not put your hand inside this product or touch the ink cartridges
during printing.
• Do not move the print head by hand; otherwise you may damage this
product.
• Do not insert objects through the slots. Take care not to spill liquid on
this product.
• Do not attempt to service this product yourself.
• Power down the printer from the control panel, unplug the printer, and
refer servicing to qualified service personnel under the following
conditions:
The power cord or plug is damaged; liquid has entered this product; this
product has been dropped or the cabinet damaged; this product does not
operate normally or exhibits a distinct change in performance.
Caution: Always turn
the printer off using the
P Power button. When
you press this button,
POWER OFF appears on
the LCD panel. Do not
unplug the printer or turn
off the power to the
printer until the panel
shuts off. This ensures
that the print head is
safely capped.
sp4800Guide.book Page 14 Monday, May 9, 2005 10:49 AM