Filter
Top Products
3-75
Printing with Epson Drivers for Macintosh | 75
The Auto Expand setting provides the best solution for borderless printing
with minimal image clipping. Using this setting, you can create a custom
paper width equal to the width of the roll media. If you use the Retain Size
setting, you should create a custom paper width slightly wider than the
actual width of the media.
The following table shows recommended image widths (in inches) for
borderless printing using either the Auto Expand or Retain Size setting:
* Non-Epson roll media widths
Make sure you set the margins to zero when printing a custom page size for
borderless printing.
Creating a Custom Preset and Printing
Once you’ve made the correct settings for your print job, create a
custom preset. This will save you time when you use the same
profile/printer/ink/media combination for future print jobs.
1. Select
Summary from the pop-up menu.
2. After verifying that your settings are correct, select
Save As from the
Presets pop-up menu.
Recommended image widths (in inches) for borderless printing
Roll
paper
width
Image width
(with Auto Expand)
Image width
(with Retain Size)
Custom Paper Size
(for Retain Size only)
8.3 8.06 8.35 8.3
10 9.7075 10.34 10.23
12* 11.8 12.34 12.23
14* 13.8 14.34 14.23
16 15.8 16.34 16.23
17 16.8 17.34 17.23
Note: If you check the
settings on each screen
in the pull-down menu,
go through them carefully
from top to bottom.
Avoid cycling through
them repeatedly, or you
may lose your settings.
sp4800Guide.book Page 75 Monday, May 9, 2005 10:49 AM