Filter
Top Products
4-91
Printing with Epson Drivers for Windows | 91
Borderless Printing
For true borderless printing on roll paper, you can select either Auto
Expand
or Retain Size and create a custom paper size, as described above.
Your image may be clipped on the left and right edges, but you can
minimize clipping by sizing your image according to the page width and by
adjusting the length.
For either setting, you should add 0.1 inch to the length of your custom size.
The Auto Expand setting provides the best solution for borderless printing
with minimal image clipping. Using this setting, you can create a custom
paper width equal to the width of the roll media. If you use the Retain Size
setting, you should create a custom paper width slightly wider that the actual
width of the media.
The following table shows recommended image widths (in inches) for
borderless printing using either the Auto Expand or Retain Size setting:
* Non-Epson roll media widths
Choosing Advanced Print Options
The advanced settings give you complete control over your printing
environment. If you are using color management setttings in Photoshop or
another application, it is very important to access the advanced settings and
turn off color management in the printer driver, as described on page 93.
1. Follow steps 1 through 4 beginning on page 84.
Recommended image widths (in inches) for borderless printing
Roll
paper
width
Image width
(with Auto Expand)
Image width
(with Retain Size)
Custom Paper Size
(for Retain Size only)
8.3 8.06 8.35 8.3
10 9.7075 10.25 10
12* 11.8 12.25 12
14* 13.8 14.25 14
16 15.8 16.25 16
17 16.8 17.25 17
sp4800Guide.book Page 91 Monday, May 9, 2005 10:49 AM