Filter
Top Products
1-22
22 | Setting Up the Printer
6. After installing all 8 cartridges, lower the ink levers. The printer begins
charging the ink delivery system and the Pause light flashes.
7. When ink lever messages appear on the LCD, follow the instructions to
raise or lower the ink levers.
8. When
READY appears on the LCD display, charging is complete. Press
the Pause button as indicated and close the ink compartment covers.
Connecting to Your System
You can use either USB or FireWire connections. Make sure your system has
the appropriate port, and you have a standard, shielded cable 10 feet long or
less.
1. Make sure that both the printer and the computer are off.
Caution: Charging takes
about 8 minutes. Never
turn off the printer,
release the paper lever, or
open the cover while the
Pause light is flashing, or
you may damage the
printer.
USB Cable FireWire Cable (included)
sp4800Guide.book Page 22 Monday, May 9, 2005 10:49 AM