Filter
Top Products
212
Chapter 8 Hardware Configuration/Utilities
8.2.3 Primary Master Submenu
Appears when [Primary Master] is selected from the [Main] menu.
Sets the type and operating mode for the connected internal hard disk unit.
table: Items on the Primary Master Submenu
Item Setting Description
Type Auto (Fixed parameter) Sets the type of the IDE device.
Transfers Mode
Disabled (Fixed parameter)
When [Type] is set to [Auto], displays the number
of sectors detected and transferred at once by the
server.
LBA Translation
Disabled (Fixed parameter)
Sets whether to enable or disable the LBA (Logical
Block Addressing: access based on logical serial
numbers).
PIO Mode
FPIO 4/DMA 2 (Fixed
parameter)
Sets the PIO (Programmed I/O) data transfer mode.
32 Bit I/O
Enabled (Fixed parameter)
Specifies the bus width for data transfer between
the CPU and the IDE controller.
Ultra DMA Mode
Mode2 (Fixed parameter) Sets the DMA (Direct Memory Access) data
transfer mode.
PhoenixBIOS Setup Utility
Item Specific Help
Main
Type: [Auto]
Transfers mode: [Disabled]
LBA Translation: [Disabled]
PIO Mode: [FPIO 4 / DMA 2]
32 Bit I/O: [Enabled]
Ultra DMA Mode: [Mode 2]
Primary Master [CD-ROM]
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit