Filter
Top Products
245
PRIMERGY RX200 S2 User’s Guide
8
Hardware Configuration/Utilities
3 Use the [↑] [↓] keys to select the hard disk to format physically. Press the
[Space] key to set it.
4 Press the [Tab] key to move to the [Format] button. Press the [Space] key.
A confirmation message is displayed.
5 Read the message, select [Format] again, and press the [Space] key.
Physical formatting starts.
When the physical formatting completes, a completion message appears.
6 Check that [Failed Formatting Drive(s)] indicates "none." Select [Exit] and press
the [Space] key.
7 Select [Exit] again and press the [Space] key.
The physical formatting has completed when a command prompt appears.
The server can be turned off.