Filter
Top Products
224
Chapter 8 Hardware Configuration/Utilities
8.2.11 Server Menu
Configures the server settings.
table: Items on the Server Menu
Item Setting Description
O/S Boot Timeout • Disabled (at the time of
purchase)
•Enabled
Sets whether to enable or disable the OS Boot
Monitoring function, when ServerView is installed to
the OS.
If for some reason booting the operating system is
interrupted when this function is enabled, the system
will automatically restart.
The OS Boot Monitoring function can also be
enabled or disabled from ServerView.
Note:
If ServerView is not installed to the OS, be
sure to set to [Disabled].
If the setting is enabled, the server may
automatically turn off or restart unexpectedly.
Even when ServerView is installed on the OS,
if starting the system while the Server
Management Tools disk is inserted, be sure to
disable the OS Boot Monitoring function.
If the system is started with this function
enabled, the server may automatically turn off
or restart improperly.
If the OS Boot Monitoring function is needed,
it should be reset to enabled before resuming
normal server operation.
When setting this function, refer to
"ServerView User's Guide" to fully learn about
its specifications, in order to use it properly
with the correct settings.
Item Specific Help
PhoenixBIOS Setup Utility
Main Advanced Security Server Exit
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit
O/S Boot Timeout: [Disabled]
Mode [Continue]
Timeout value [0]
ASR&R Boot Delay(min): [2]
Power Cycle Delay: [5]
Boot Retry Counter: [3]
Diagnostic System: [Disabled]
Critical Temperature Monitoring:[Disabled]
Clear Screen Delay(sec): [5]
IPMI
CPU Status
Memory Status
Console Redirection
Memory scrub: [Enabled]
BIOS runtime logging: [Enabled]
LAN Setting