Filter
Top Products
235
PRIMERGY RX200 S2 User’s Guide
8
Hardware Configuration/Utilities
• To exit the SCSI Setup Utility
Select [Exit the Configuration Utility] and press the [Enter] key.
The SCSI Setup Utility closes and the system restarts.
• To return to the [Main] menu
Select [Cancel Exit] and press the [Enter] key.
• To save the current settings
Select [Save changes then exit this menu] and press the [Enter] key.
• To discard the current settings
Select [Discard changes then exit this menu] and press the [Enter] key.
To configure an optional SCSI card or SCSI devices on the SCSI bus
For information on the SCSI card utility, refer to the manual for the card.
In the SCSI Setup Utility, configure each SCSI bus.