Filter
Top Products
CHAPTER 6: ACCESS CONSIDERATIONS ACCESS CONSIDERATIONS
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 6–9
(such as unexpected behavior). The specific types of logs can be viewed and cleared. The
show log command displays the log information and the clear log command clears
the log entries. The syntax for these commands is shown below:
show log [1..5|informational|debug|fatal |critical|activity]
clear log [informational|debug|activity |critical|fatal]
The
set logsize command set the number of lines to be collected in the log before the
oldest record is re-written. The syntax for this command is:
set logsize size=<1-1000>
Example 6-6 illustrates the
show log and clear log commands. The show log
command indicates the type of log activity in the S column. I indicates informational
entries and A indicates activities which are a result of port-security setup. Notice the
clear log informational command clears the informational entries only.
The log shows the most recent intrusion at the top of the listing. If the log is filled when the
switch detects a new intrusion, the oldest entry is dropped off the listing.
As discussed in the prior section, any port can be set to monitor security as well as make a
log on the intrusions that take place. The logs for the intrusions are stored on the switch.
When the switch detects an intrusion on a port, it sets an “alert flag” for that port and
makes the intrusion information available.
The default log size is 50 rows. To change the log size, use the
set logsize command.
Example 6-6: Security log commands
ML1200# show log
S Date Time Log Description
- ---- ---- ---------------
I 12-07-2004 9:01:34 A.M CLI:manager console login
I 12-07-2004 5:54:23 P.M SNTP:Date and Time updated from SNTP server
I 12-08-2004 6:09:00 P.M SNTP:Date and Time updated from SNTP server
I 12-09-2004 1:48:56 P.M TELNET:Telnet Session Started
I 12-09-2004 1:49:23 P.M CLI:manager console login
I 12-09-2004 4:26:26 P.M TELNET:Telnet Session Started
I 12-09-2004 4:26:34 P.M CLI:manager console login
I 12-09-2004 6:23:37 P.M SNTP:Date and Time updated from SNTP server
I 12-10-2004 6:38:13 P.M SNTP:Date and Time updated from SNTP server
I 12-11-2004 10:16:24 A.M TELNET:Telnet Session Started
I 12-11-2004 6:52:49 P.M SNTP:Date and Time updated from SNTP server
I 12-12-2004 12:40:35 P.M TELNET:Telnet Session Started
I 12-12-2004 12:40:42 P.M CLI:manager console login
A 12-17-2004 12:05:52 P.M PS:INTRUDER 00:e0:29:6c:a4: fd@port11, packet dropped
A 12-17-2004 12:07:04 P.M PS:INTRUDER 00:50:0f:02:33: b6@port15, packet dropped
A 12-17-2004 12:07:16 P.M PS:INTRUDER 00:e0:29:2a:f0: 3a@port15, packet dropped
ML1200# clear log informational
Clear Logged Events? ['Y' or 'N']
ML1200# show log
S Date Time Log Description
- ---- ---- ---------------
A 12-17-2004 12:05:52 P.M PS:INTRUDER 00:e0:29:6c:a4: fd@port3, packet dropped
A 12-17-2004 12:07:04 P.M PS:INTRUDER 00:50:0f:02:33: b6@port5, packet dropped
A 12-17-2004 12:07:16 P.M PS:INTRUDER 00:e0:29:2a:f0: 3a@port5, packet dropped