GE ML1200 Switch User Manual


 
CHAPTER 17: MISCELLANEOUS COMMANDS MISCELLANEOUS COMMANDS
MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL 17–17
portaccess
reauth
setport
show-port
show-stats
trigger-reauth
The device commands are shown below.
device
backpressure
broadcast-protect: enables or disables broadcast storm protection globally
flowcontrol
rate-threshold: sets the broadcast rate threshold (frames/sec)
setage: sets the mgtagetime
setport: sets the port configuration
The VLAN registration over GARP (GVRP) commands are shown below. Refer to Chapter 11 -
VLAN Registration over GARP for details.
gvrp
help gvrp: configures GVRP parameters for dynamic VLAN
set-forbid: sets forbidden ports for a tag-based VLAN
show-ports: show ports current GVRP state
show-forbid: show forbidden ports for tag-based VLAN
set-ports: set GVRP port state usage
show-vlan: shows dynamic/static tag-based VLANs
static: convert dynamic VLAN to static VLAN
The IGMP commands are shown below. Refer to Chapter 15 - IGMP for additional details.
mcast
set-leave: enables or disables IGMP immediate leave status
set-port: sets the port mode
set-qi: sets the query interval (60 to 127) for router ports
set-qri
set-querier: enables or disables switch as querier
show-group: displays IGMP group list
show-port: displays IGMP port mode
show-router: displays IGMP router list
The Link Aggregation Control Protocol (LACP) commands are shown below.
lacp
add port
del port
edit port