Filter
Top Products
2-2
Installation 2
Locator Plate Installation
Locator Plate Installation
The locator plate serves two functions:
• Positions the racks and accessories that fit onto
the bed of the liquid handler.
• Contains liquid spills, such as those caused by
overflowing vessels.
The locator plate and its four mounting screws are
shipped in a separate box with the liquid handler’s
accessories. To install the locator plate onto the
instrument bed:
1 Make sure the locator plate’s rinsing station
base is at the rear of the instrument. The locator
plate will only install in this orientation.
2 Align the four corner holes of the locator plate
with the four holes on the instrument bed and
lower the plate onto the bed.
3 Using a Phillips screwdriver, secure the locator
plate using the four mounting screws.