Filter
Top Products
3-4
Operation 3
Running Programs
Running Programs
The liquid handler is controlled by programs
executed from a personal computer.
Executable (.EXE) programs can be run from a
computer. The computer is connected to the liquid
handler via an RS-232 cable. Refer to Section 2 for
correct installation of the RS-232 cable between the
liquid handler and the computer.
The following utility programs may be used with
the Quad-Z 215 Liquid Handler and are supplied
on the 215 Utility Programs CD-ROM supplied
with your liquid handler.
215 Setup Utility - Specifies configuration
parameters for the liquid handler.
215 Contact Test Utility - Enables you to test
contact connections.