Filter
Top Products
System Administrator Screens
54 312353B
Host (Name or IP Address) is the DMS host name or
IP address. If the DMS is hosted remotely by R&R, this
is the public- or Internet-facing IP address.
Test Connection allows for a simple check of network
connectivity to the R&R DMS. It will indicate whether a
network connection can be made to the DMS, but it will
not indicate whether the DMS is properly configured.
Server Name is a 15-character identifier assigned by
R&R. Also referred to as System Identifier or Proc Sys
ID. Graco technical support personnel will have this
information when they assist with enabling the DMS
interface.
Store Number and Branch Number refer to the store
and branch within the customer’s ERA system that the
Matrix system will communicate with.
Bulk fluids Managed/Sold By is a drop-down list that
allows you to choose the method of bulk fluid manage-
ment--GOG or Parts--the dealership will use. Other
interface-specific setup screens are defined by the
selection made in this field.
Matrix/R&R Interface State can be either enabled or
disabled. This setting is system-wide; the default is dis-
abled.
If disabled, the interface is disabled for all meters; this
setting makes the system function like a standard Matrix
Full Line system. This setting should stay disabled until
Graco, in cooperation with the dealer, configures the
interface. This happens after the distributor completes
installation of the system.
To activate the interface to R&R, this setting will be set
to enabled by the Graco Technical Support person. Note
that since each meter has its own interface state setting,
it is possible to have some meters using the interface
(i.e. the global interface is enabled, the meter-specific
interface setting is enabled, and any dispenses by the
meter is billed to the correct RO on the DMS) and some
meters not using the interface (i.e. the global interface is
enabled, the meter-specific interface setting is disabled,
and no dispenses by the meter are billed to an RO on
the DMS). In all cases, Matrix will record the exact
amount dispensed by any meter, independent of inter-
face settings.
Whether this global state setting is enabled or disabled,
the HASP key that is included with this software must be
plugged in at all times.