Filter
Top Products
108
Enhancements in Release F.04.08
Configuring RADIUS Authentication and Accounting
For example, suppose you have already configured local passwords on the switch, but want to use
RADIUS to protect primary Telnet and SSH access without allowing a secondary Telnet or SSH access
option (which would be the switch’s local passwords):
Figure 42. Example Configuration for RADIUS Authentication
Note
In the above example, if you configure the Login Primary method as local instead of radius (and local
passwords are configured on the switch), then you can gain access to either the Operator or Manager
level without encountering the RADIUS authentication specified for Enable Primary. Refer to “Local
Authentication Process” on page 113.
The switch now allows
Telnet and SSH
authentication only
through RADIUS.