HP (Hewlett-Packard) 2500 Switch User Manual


 
237
Software Fixes
Port Configuration — Changing a port setting from one Auto mode to another may not be
reflected in Auto-negotiation's advertised capability without a switch reset, or module hot-
swap.
Port Monitoring — Port monitoring does not work correctly after a TFTP transfer of the
configuration from the switch to the server and then back to the switch.
Stack Management — Master switch was not properly making security checks when
passing information along to a member switch.
TFTP — Menu and browser displays of switch configuration are not accurate after a TFTP
transfer of the switch config file to the switch. Only occurs when a port is configured for
network monitoring.
VARIOUS: Crash/Bus Error — A Get request of a specific long OID can result in a bus
error, an agent hang, or a switch crash with a message similar to:
-> Software_exception at svc_misc.s:379 -- in mCdpCtrl
malloc_else_fatal() ran out of memory
Web-Browser Interface — Web display of port utility window did not display port H24.
Web-Browser Interface — User could input an invalid MAC address, i.e. multicast or
broadcast address, in the security policy field.
Web-Browser Interface — Incorrect font size used in VLAN configuration screen.
Release F.04.02 (Beta Release Only)
Fixed in release F.04.02
Corrupted Flash — An SNMP set, during the OS download operation of TopTools, while
the switch is writing new OS to flash may result in corrupted flash and switch may boot up
in LAN Monitor mode.
Release F.04.03 (Beta Release Only)
Fixed in release F.04.03
Modification of Lab troubleshooting commands.
Release F.04.04 (Beta Release Only)
Fixed in release F.04.04
Modification of Lab troubleshooting commands.