Filter
Top Products
42
Enhancements in Release F.05.05 through F.05.70
Enhancements in Release F.05.05 through F.05.60
3. Configure the 802.1X Authentication Method
This task specifies how the switch will authenticate the credentials provided by a supplicant
connected to a switch port configured as an 802.1X authenticator.
For example, to enable the switch to perform 802.1X authentication using one or more EAP-capable
RADIUS servers:
Figure 12. Example of 802.1X (Port-Access) Authentication
Syntax: aaa authentication port-access < local | eap-radius | chap-radius >
Determines the type of RADIUS authentication to use.
local Use the switch’s local username and password for
supplicant authentication.
eap-radius Use EAP-RADIUS authentication. (Refer to the
documentation for your RADIUS server.)
chap-radius Use CHAP-RADIUS (MD-5) authentication.
(Refer to the documentation for your RADIUS server appli-
cation.)
802.1X (Port-Access)
configured for EAP-
RADIUS authentication.
Configuration command for
EAP-RADIUS
authentication.