Filter
Top Products
198
Enhancements in Release F.02.02
New Time Synchronization Protocol Options
Disabling the SNTP Mode. If you want to prevent SNTP from being used even if selected by timesync
(or the Menu interface’s
Time Sync Method parameter), configure the SNTP mode as disabled.
Syntax: no sntp Disables SNTP by changing the SNTP mode configuration to
Disabled.
For example, if the switch is running SNTP in Unicast mode with an SNTP server at 10.28.227.141
and a server version of 3 (the default),
no sntp changes the SNTP configuration as shown below, and
disables time synchronization on the switch.
Figure 95. Example of Disabling Time Synchronization by Disabling the SNTP Mode
TimeP: Viewing, Selecting, and Configuring
Timep Features
Feature Default Menu CLI Web
view the Timep time synchronization configuration n/a page 199 page 201 —
select Timep as the time synchronization method TIMEP page 198 pages 202
ff.
—
disable time synchronization timep page 200 page 204 —
enable the Timep mode Disabled —
DHCP — page 200 page 202 —
manual — page 200 page 203 —
none/disabled — page 200 page 205 —
change the SNTP poll interval 720 minutes page 201 page 204 —
Even though the Time Sync Mode is set to Sntp,
time synchronization is disabled because no
sntp has disabled the SNTP Mode parameter.