Filter
Top Products
61
Enhancements in Release F.05.05 through F.05.70
Enhancements in Release F.05.05 through F.05.60
Displaying 802.1X Configuration, Statistics, and Counters
Show Commands for Port-Access Authenticator
802.1X Authentication Commands page 38
802.1X Supplicant Commands page 57
802.1X Open VLAN Mode Commands page 44
802.1X-Related Show Commands
show port-access authenticator below
show port-access supplicant page 66
Details of 802.1X Mode Status Listings page 63
RADIUS server configuration pages 43
Syntax: show port-access authenticator [[e] < port-list >]
[config | statistics | session-counters]
•Without [< port-list > [config | statistics | session-counters]],
displays whether port-access authenticator is active (Yes
or No) and the status of all ports configured for 802.1X
authentication. The Authenticator Backend State in this
data refers to the switch’s interaction with the
authentication server.
•With < port-list > only, same as above, but limits port status
to only the specified port. Does not display data for a
specified port that is not enabled as an authenticator.
•With [< port-list > [config | statistics | session-counters]],
displays the [config | statistics | session-counters] data for the
specified port(s). Does not display data for a specified
port that is not enabled as an authenticator.
•With [config | statistics | session-counters] only, displays the
[config | statistics | session-counters] data for all ports
enabled as authenticators.
For descriptions of [config | statistics | session-counters] refer
to the next section of this table.