Filter
Top Products
71
Enhancements in Release F.05.05 through F.05.70
Enhancements in Release F.05.05 through F.05.60
IGMP Version 3 Support
When the switch receives an IGMPv3 Join, it accepts the host request and begins forwarding the
IGMP traffic. This means that ports that have not joined the group and are not connected to routers
or the IGMP Querier will not receive the group’s multicast traffic.
The switch does not support the IGMPv3 "Exclude Source" or "Include Source" options in the Join
Reports. Instead, the group is simply joined from all sources.
The switch does not support becoming a version 3 Querier. It will become a version 2 Querier in the
absence of any other Querier on the network.
LACP has been disabled on 802.1X
port(s).
Error configuring port < port-number
>: LACP and 802.1X cannot be run
together.
To maintain security, LACP is not allowed on ports config-
ured for 802.1X authenticator operation. If you configure
port security on a port on which LACP (active or passive) is
configured, the switch removes the LACP configuration,
displays a notice that LACP is disabled on the port(s), and
enables 802.1X on that port.
Also, the switch will not allow you to configure LACP on a
port on which port access (802.1X) is enabled.
Message Meaning