HP (Hewlett-Packard) 2500 Switch User Manual


 
200
Enhancements in Release F.02.02
New Time Synchronization Protocol Options
Figure 96. The System Information Screen (Default Values)
2. Press
[E] (for Edit). The cursor moves to the System Name field.
3. Use [v] to move the cursor to the
Time Sync Method field.
4. If
TIMEP is not already selected, use the Space bar to select TIMEP, then press [v] once to display
and move to the
TimeP Mode field.
5. Do one of the following:
Use the Space bar to select the
DHCP mode, then press [v] to move the cursor to the Poll
Interval field, and go to step 6.
Use the Space bar to select the
Manual mode.
i. Press [>] to move the cursor to the
Server Address field.
ii. Enter the IP address of the TimeP server you want the switch to use for time synchro-
nization.
Note: This step replaces any previously configured TimeP server IP address.
Time Protocol Selection Parameter
TIMEP (the default)
–SNTP
None