HP (Hewlett-Packard) 2500 Switch User Manual


 
121
Enhancements in Release F.04.08
Configuring RADIUS Authentication and Accounting
Updates: In addition to using a Start-Stop or Stop-Only trigger, you can optionally configure
the switch to send periodic accounting record updates to a RADIUS server.
Suppress: The switch can suppress accounting for an unknown user having no username.
Syntax: [no] aaa accounting update periodic < 1 .. 525600 > Sets the accounting update period
for all accounting sessions on the
switch. (The no form disables the
update function and resets the value
to zero.) (Default: zero; disabled)
[no] aaa accounting suppress null-username Disables accounting for unknown
users having no username.
(Default: suppression disabled)
To continue the example in figure 48, suppose that you wanted the switch to:
Send updates every 10 minutes on in-progress accounting sessions.
Block accounting for unknown users (no username).
Figure 49. Example of Optional Accounting Update Period and Accounting Suppression on Unknown User
Viewing RADIUS Statistics
General RADIUS
Syntax: show radius [ host < ip-addr >] Shows general RADIUS configuration, including the
server IP addresses. Shows data for a specific
RADIUS host. To use this command, the server’s IP
address must be configured in the switch.
Update Period
Suppress Unknown User