HP (Hewlett-Packard) 2500 Switch User Manual


 
11
Enhancements in Release F.05.05 through F.05.70
Enhancements in Release F.05.05 through F.05.60
LLDP Operation and Commands
In the default configuration, LLDP is enabled to transmit on all active ports. The LLDP configuration
includes global settings that apply to all active ports on the switch, and per-port settings that affect
only the operation of the specified ports.
Viewing the Current LLDP Configuration
Use the show lldp config command to display the switch’s general LLDP configuration status,
including some per-port information affecting advertisement traffic.
For example, show lldp config produces the following display when the switch is in the default LLDP
configuration:
Figure 1. Example of Viewing the General LLDP Configuration
Syntax show lldp config
Displays the LLDP global configuration and LLDP port status.
HP ProCurve Switch 2524# show lldp config
LLDP Global Configuation
LLDP Enabled [Yes]: Yes
LLDP Transmit Interval: 30(Not Configurable)
LLDP Port Configuration
Port | LLDP
---- + ----
1 | enabled
2 | enabled
3 | enabled
4 | enabled
5 | enabled
6 | enabled
7 | enabled
8 | enabled
.
.
26 | enabled
HP ProCurve Switch 2524#