Filter
Top Products
213
Enhancements in Release F.02.02
Operation and Enhancements for Multimedia Traffic Control (IGMP)
For example:
Figure 106. Listing the Forced Fast-Leave State for Ports in an HP2512 Switch
To list the Forced Fast-Leave state for a single port.
Syntax: getmib hpSwitchIgmpPortForcedLeaveState.1. <port-number> (Not case-sensitive.)
getmib 1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.5.1. <port-number>
For example, to use either of the above command versions to list the state for port 7:
Figure 107. Listing the Forced Fast-Leave State for a Single Port
In this example, the 2 at the
end of each port listing
shows that Fast Forced-
Leave is disabled on all
ports in the switch.
The 7 specifies port 7.
The 2 shows that Fast
Forced-Leave is disabled on
port 7.