Filter
Top Products
235
Software Fixes
■ XRMON — Various XRMON counters display incorrect values. Possible symptoms include
network management applications reporting a too high network utilization (TopTools may
report "crossed octets").
Release F.02.08 (Beta Release Only)
Fixed in F.02.08:
■ Crash — If a transceiver is repeatedly installed and removed, the switch may crash with a
message similar to:
-> Software exception at woodyDma_recv.c:154 -- in 'eDrvPoll'
Release F.02.09
Fixed in F.02.09:
■ Configuration download — Downloading a configuration file (via TFTP or Xmodem)
sometimes failed to reboot the switch.
■ Isolated Port Groups — Downloading a configuration file (via TFTP or Xmodem)
containing port isolation commands may fail with error messages similar to:
line: 6. Error setting configuration tree.
Corrupted download file.
Release F.02.10
Fixed in release F.02.10:
■ LEDs/Port toggling — The switch LEDs flash randomly on various ports (even ports that
do not have cables attached) when a 100/1000-T transceiver is installed. Excessive port
toggling may also occur on ports that have cables attached. These problems have been
associated with network management applications such as TopTools.
Release F.02.11
Fixed in release F.02.11
■ Auto-TFTP — If the switch's configuration file contains STP (i.e., STP is enabled), auto-tftp
does not download a new OS.
■ Transceivers — Removing and re-inserting both transceivers simultaneously many times
with network cables attached and without an intervening reboot may cause the switch to
crash with a message similar to:
-> Software exception in ISR at buffers.c:1627