Filter
Top Products
● network problems (cable malfunction, hub, or router problems)
● not on the network
● the IP address or host name specified is not a domain controller
● power is disconnected or interrupted
Action:
● Retype the WINS server address in the xxx.xxx.xxx.xxx format on Microsoft
Network Settings page and try again.
A properly configured WINS server is essential for the proper operation of the
PSA. If the PSA cannot reach the WINS server, users on other subnets (on the
other side of a router) will not be able to see the PSA in Network Neighborhood.
● If the DNS server, WINS server, or Domain Controller is not on the same subnet as
the PSA, ensure that the TCP/IP configurations, as entered on the TCP/IP and
DNS page (in the web interface under Networking), are configured correctly and
that the network infrastructure, such as the default gateway, is configured and is
operational.
Failed WINS name resolution (210)
Level: Error
Category: Networking
Description: The PSA could communicate with the WINS server but could not resolve
the name. A properly configured WINS server is essential for the proper operation of the
PSA. If the PSA cannot use the WINS server to resolve IP addresses, it will not be able to
communicate with the device.
Action: The NT Domain Name might have been misspelled on the Microsoft Network
Settings page (in the web interface under Networking).
Make sure the network has a WINS server configured and the WINS server address on the
Microsoft Network Settings page is correct. Make sure the WINS server has an entry for
the device being looked up.
For example, if the WINS server does not reply with the IP address of a Domain