Filter
Top Products
Print Server
Appliance
Name
Type a name for the PSA. The PSA name will be displayed:
● In the Network Neighborhood and in My Network Places on each client workstation.
Both are visible from Microsoft Windows Explorer.
● On the Overview page in the web interface for the PSA.
● On the front panel of the PSA.
If the network uses DNS to identify network resources, this name should match the DNS
name.
The PSA name can contain up to 15 alphanumeric characters. It may also contain hyphens
( - ) and underscores (_). (This name cannot begin with a hyphen (-), but it can have a
hyphen within the name. The hyphen cannot be the first character because the PSA name is
also used as a host name, and the hyphen character is not allowed as the first character in a
host name.)
Primary
WINS Server
Address
(Windows Internet Name Server) Enables network resources (such as PCs and printers) to
be specified by their friendly names instead of their IP addresses. In order to use this
functionality, specify the primary WINS server by its IP address, not by its friendly name.
Once the primary WINS server is specified, use friendly names across other configuration
areas of the PSA (such as the queue configuration screen).
If the network does not have a WINS server configured, leave this field (and the next field)
blank. Without a WINS server configured, Windows 95, 98, and ME clients may be unable to
print to a PSA located on a different subnet. Domain integration may behave unpredictably
if this field is blank.
Secondary
WINS Server
Address
If the primary WINS server is unavailable, this secondary server will be contacted. Specify
the secondary WINS server by its IP address, not by its friendly name.
If the network does not have a WINS server configured, leave this field blank (or empty).
Windows
Domain or
Workgroup
Specify the Windows domain or workgroup (NT, 2K, or Windows Server 2003) to which this
PSA belongs. The PSA will appear under this name in Network Neighborhood.
Enable
Domain
Authentication
Check this box to enable domain security for the PSA (for NT, 2K, or Windows Server 2003).
Uncheck the box to disable domain security. (The default is disabled.)
Automatically
Discover
Domain
Controllers
Select this to automatically discover the domain controller for the domain or workgroup as
specified above in the Windows Domain or Workgroup field (for NT, 2K, or Windows
Server 2003) .
Manually
Specify
Domain
Controllers
Select this to manually specify the domain controllers for NT, 2K, or Windows Server 2003.
Domain
Controller
Type the domain controller's name or IP address to be added to the list of Configured
Domain Controllers; click
to add it to the list.