Filter
Top Products
No toner
Informational message.
Off line
Informational message.
Online
Informational message.
Paper jam
Informational message.
Paused
Informational message.
printing
Confirmation message.
queued
Confirmation message.
Service required
Informational message.
spooling
Confirmation message.
The IP Address you entered is the address of this
PSA. Please enter the name or IP address for the
printer you wish to add.
Each printer on the network has a unique IP address. This
may be the printer's IP address or its DNS hostname. If a
DNS hostname is being used, a DNS server address must
be specified for the PSA on the TCP/IP and DNS
Settings page (on the menu in the web interface under
under Networking).
The printer hostname you entered is the same as this
print server appliance. Please enter the name or IP
address for the printer you wish to add.
Each printer on the network should have a unique
hostname. Retype the name or IP address and make sure
it is unique.
The printer you selected was not found.
An attempt was made to print to a printer that does not
exist.
You must specify a printer name for this printer.
The PSA allows up to 79 characters for the share name.
However, for any name over 12 characters, Windows
95/98/ME and older systems might not be able to access
the share.
You must specify the address of this printer.
The printer address can only contain alphanumeric
characters, spaces, dash (-) underscore (_) plus sign (+)
ampersand (&), comma (,) and period (.).
You must specify the remote queue name for this
printer.
When Other print server is selected, the Remote
Queue Name field must be completed. Specify the
Remote Queue Name of this printer.
The driver you have selected does not support client
side rendering.
A print share is being created and the client side
rendering box is checked but thie driver is not capable
of client side rendering.
NT clients cannot print with drivers using client side
rendering. If you have NT clients, do not connect
them to this share or go back and deselect client side
rendering.
A print share is being created and the driver selected is
capable of client side rendering. This is a warning to not
use drivers capable of client side rendering with NT
clients.
Driver Management Page
Message Explanation / Remedy