Filter
Top Products
Print Server Name
Name as typed in the Print Server Appliance Name field on the Microsoft Network
Settings page (in the web interface under Networking).
Appliance Status
Status of this PSA. If a backup, restore, or upgrade is in process, shows the current
state of that operation.
System Load
Shows how heavily the PSA has been used in the past 15 minutes. (See the System
Load section on the Diagnostic Report for more information.)
Disk Usage
Percentage of disk space used on the PSA.
DNS Servers
Lists the number of configured DNS servers that are reachable across the network. This
value is updated every ten minutes or whenever Diagnostics are run.
WINS Servers
Lists the number of configured WNS servers that are reachable across the network. This
value is updated every ten minutes or whenever Diagnostics are run.
Microsoft Domain
If Domain Mode is enabled on the PSA (on the Microsoft Network Settings page) ,
this displays the name of the domain it is a member of and its status.
DNS Domain
The DNS Domain name as typed in the DNS Domain field on the TCP/IP and DNS page
(in the web interface under Networking).
IP Address
The IP address for the PSA as typed on the IP Address field on the TCP/IP and DNS
page (in the web interface under Networking).
Ethernet Address
The PSA's IEEE Ethernet (802.3) Link Level MAC (Media Access Control) address.
Serial Number
Serial number for the PSA.
Firmware revision
Firmware revision number currently on the PSA.