Filter
Top Products
Power LED
ON when power is supplied to the PSA and it is turned on.
Network Activity LED
LIT when there is a connection between the PSA and other network devices.
BLINKS when there is network activity between the PSA and other network
devices.
Disk Activity LED
ON when there is disk activity on the PSA.
Alert LED
OFF during normal operations (ON during bootup and shutdown).
Power Button - Starting Up and Shutting Down the PSA
Press the Power button to power up the PSA. The bootup process begins. When the device is powered on, the Power LED
is lit. To turn off the PSA, press the Power button and wait for about 20 seconds for the PSA to power down. The PSA
performs an orderly shutdown.
If print jobs are printing when the PSA is powered down, the print jobs will not be completed. Jobs waiting to be printed
will resume printing when the PSA is fully booted. If the PSA loses power unexpectedly and is not powered down, spooled
print jobs that had not yet begun printing or print jobs that were in the middle of printing will resume printing when
power is restored and the PSA is powered up again. If, however, the integrity of the PSA or print jobs are compromised,
print jobs that were not spooled would have to be resent.
Front Panel Display
The LCD display has two rows of 16 characters or spaces. It is used to display the status of the PSA and to display
configuration information entered at the front panel. The following arrow buttons are displayed on the front panel:
Indicates that the menu can scroll. scrolls up, scrolls down.
Indicates that choices can be toggled through.
Enter and Cancel Buttons
Enter. Accept changes or begin an operation.