Filter
Top Products
Power Outages
1. What happens if the PSA experiences an unplanned power interruption?
2. How do I connect an uninterruptible power supply (UPS)?
3. How does an uninterruptible power supply (UPS) work with the PSA PSA when the power fails?
Answers
Configuration
1. Can I use Web Jetadmin to manage my PSA?
Yes, With Web JetAdmin 7.2 (and above), and the downloadable PSA plugins for WJA , you can now
configure and manage all of your PSAs that are running on the 2.4.X version of firmware. Features include
the ability to schedule backups and firmware upgrades after hours, pushing printer drivers to multiple PSAs
simultaneously, and setting traps and alerts for different events.
2. Does the PSA support bootp or rarp?
No, but the PSA does support DHCP.
3. What features on the Properties Page in Network Neighborhood are supported by the PSA?
The PSA uses the printer configuration page on the Printer Properties window (which is displayed after right-
clicking on a printer and then selecting Properties) for driver configuration changes and recognizes some
other settings, such as security settings. However, the PSA does not recognize many of the settings if they
are changed using these driver management tools.
❍ General tab
■ Comments text field - supported
■ Location text field - supported
■ Driver dropdown - the driver can be changed if and only if the driver is an initialized driver;
otherwise, the administrator will be prompted to change the driver through the PSA's web
interface so that the driver can be initialized.
■ New Driver button - the driver can be uploaded to the PSA, but will not be associated with
this printer until the administrator uses the PSA's web interface to change the driver so that
it can be initialized.
■ Separator Page button - not supported
■ Print Processor button - not supported
■ Print Test Page button - supported
❍ Ports tab (all buttons are disabled for remote printers)
■ Enable bi-directional support check box - not supported
■ Enable printer pooling check box - not supported
❍ Scheduling tab
■ Availability - should be left on "Always"; print jobs submitted during unavailable time will be
deleted and not spooled.
■ Priority scale - not supported
■ Spool print document so program finishes printing faster toggle - supported
■ Print directly to the printer toggle - supported