Filter
Top Products
114 Chapter2
Opening Your Personal Workstation and Installing Accessories
Installing and Removing Accessory Boards
5. Screw the T-15 Torx screw into the slot at the top of the I/O card’s
bulkhead. See Figure 2-77.
Figure 2-77 Completing the I/O Card Installation
6. Ensure all cables internal to the Personal Workstation are clear of
any sharp edges or hot components. Next replace the left-side panel of
the Personal Workstation as explained in the section “Replacing the
Left-Side Panel” in this chapter.
T-15 Torx
Screw