Filter
Top Products
54 Chapter2
Opening Your Personal Workstation and Installing Accessories
If you will be either installing or removing accessories from your
Personal Workstation, you will need to have the proper tools for these
tasks:
• A light-duty flat-blade screwdriver with a 150mm (6 inch) shaft. The
flat blade should be of the proper width to fit in the slot on a T-15 Torx
screw.
• A T-15 Torx screwdriver. Note that the screws these screwdrivers are
used on have a recessed slot for use with a flat-bladed screwdriver.
WARNING Always unplug the Personal Workstation power cord from the
electrical outlet or power source before opening the Personal
Workstation.